COVID 19 - In the interest of public safety for our couriers, customers and staff Tyges will be closing until further notice. Stay Safe and Stay Inside.

Alclad II Paints 30ml

£5.25
You will earn 5 points with this purchase
Information

Alclad paints are airbrush ready, metallic, lacquers.

To keep the high gloss shine of the Alclad Metallic Lacquer, we recommend using Alclad Aqua Gloss Acrylic Varnish.

PREPARATION AND SPRAYING:

  • Surfaces to be painted must be thoroughly clean and free from dust, grease, oil and finger marks.
  • Apply the correct primer for the type of Alclad being used.
  • ALCLAD should be sprayed at 12-15psi.
  • Spray from a distance of 2-3 inches from the surface being painted using a narrow to medium width spray fan.
  • Use the airbrush like a paint brush and aim to cover the surface in a methodical manner.
  • Buffing is not necessary.

REGULAR ALCLAD can be masked over and painted. Decal solutions can be used with REGULAR ALCLAD, but are not recommended for HIGH SHINE ALCLAD

Airbrushes should be cleaned with airbrush cleaner.

CANDY ENAMELS:

Bright Silver Candy Base:

  • Shake thoroughly before use.
  • Do not thin.
  • Surfaces must be completely clean.
  • Apply 1 medium coat at 20-30PSI to clean bare plastic.
  • Dry time 15-30 minutes.
  • As the carrier evaporates the shine will develop.
  • Allow to cure for 1 hour before coating with Alclad Candy Enamels.
  • Avoid using in excessively damp or humid conditions.
  • Finger marks on the bare plastic will appear in the final finish.

Candy Enamel top coats:

  • Shake thoroughly before use.
  • Do not thin.
  • Apply over Alclad Bright Silver Candy Base.
  • Spray light coat at 20-25PSI.
  • Wait 5 minutes.
  • Apply further even coasts.
  • Allow 5 minutes between each coat.
  • Leave to cure for 2 hours before handling.
Specifications
  • Product Code:
    ALC-107-30ml
  • Weight:
    0.05kg
Reviews
Not yet reviewed
Write an online review and share your thoughts with other shoppers!
Be the first to review this product