In Stock

Alclad II 60ml


Alclad paints are airbrush ready, metallic, lacquers.

SKU: N/A Category:


Alclad paints are airbrush ready, metallic, lacquers.

To keep the high gloss shine of the Alclad Metallic Lacquer, we recommend using Alclad Aqua Gloss Acrylic Varnish.


  • Surfaces to be painted must be thoroughly clean and free from dust, grease, oil and finger marks.
  • Apply the correct primer for the type of Alclad being used.
  • ALCLAD should be sprayed at 12-15psi.
  • Spray from a distance of 2-3 inches from the surface being painted using a narrow to medium width spray fan.
  • Use the airbrush like a paint brush and aim to cover the surface in a methodical manner.
  • Buffing is not necessary.

REGULAR ALCLAD can be masked over and painted. Decal solutions can be used with REGULAR ALCLAD, but are not recommended for HIGH SHINE ALCLAD

Airbrushes should be cleaned with airbrush cleaner.


Bright Silver Candy Base:

  • Shake thoroughly before use.
  • Do not thin.
  • Surfaces must be completely clean.
  • Apply 1 medium coat at 20-30PSI to clean bare plastic.
  • Dry time 15-30 minutes.
  • As the carrier evaporates the shine will develop.
  • Allow to cure for 1 hour before coating with Alclad Candy Enamels.
  • Avoid using in excessively damp or humid conditions.
  • Finger marks on the bare plastic will appear in the final finish.

Candy Enamel top coats:

  • Shake thoroughly before use.
  • Do not thin.
  • Apply over Alclad Bright Silver Candy Base.
  • Spray light coat at 20-25PSI.
  • Wait 5 minutes.
  • Apply further even coasts.
  • Allow 5 minutes between each coat.
  • Leave to cure for 2 hours before handling.

Additional information

Weight N/A
Dimensions 25 × 15 × 15 cm

ALC 313-6- Klear Kote Matte, ALC 600-60 Aqua Gloss, ALC 310-60 Klear Kote Gloss, ALC 305-60 Gloss Black Base


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.