In Stock

Fast cast F180 Polyurethane Resin

£10.99£26.00

F180 is a fast casting, durable, impact resistant and harder to chip resin. The colour when cured is a very clean bright white.

Clear
SKU: N/A Category:

Description

Fast cast F180 polyurethane resin by Axson.

Used for casting in Silicone rubber moulds.

Ideal for making:

  • Hard rigid masks,
  • Armour,
  • Pendants,
  • Buckles or
  • Custom sculpted and moulded parts.

Tip! Use Tyge’s Iron powder to coat the silicone mould surface for Cold cast metal parts!

F180 is a fast casting, durable, impact resistant and harder to chip resin. The colour when cured is a very clean bright white.

Characteristics and Advantages:
– Fast cast polyurethane

– 3.5 minute pot life

– Shore D 70* hardness ( Firm and strong)

– 45 minute demould time
– Can be filled with mineral filler (up to 180%)
– Impact resistant
– Low shrinkage
– Quick setting system
– Reduced viscosity
– Impact resistant
– Adequate viscosity even with high rate of filler

Unfilled fast cast resins are usually used for making detailed models and mouldings with thin walls due to their excellent flow rate. They can, however, be cast in thicker layers by adding filling materials to them.

SHAKE WELL BEFORE USE.

Wear gloves & protective safety equipment.

Instructions:

1. Mix ratio 1:1 by weight material.

2. Use a suitable Silicone mould release agent such as talcum powder or a wax release.

3. Mix in a clean container with a clean stirring stick.

4. Ensure both Poly and Iso are shaken separately before mixing.

5. Scrape bottom and sides of the mixing container.

6. Pour the mixture into the lowest part of your mould, avoiding air entrapment.

7. De-mould after 45 minutes.

8. Ensure good ventilation, wear gloves, safety glasses & waterproof clothes.

Additional information

Weight N/A
Size

500 Kit (250 Poly 250 ISO), 1kg Kit (500 Poly 500 ISO), 2kg Kit (1kg Poly 1kg ISO)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.